Women's dress pattern A0001

Women's dress A0001
Patterns are suitable for fabrics such as linen, viscose, and eyelet
!!!Before cutting, it is recommended to pre-shrink (decatize) all fabrics so that any shrinkage occurs prior to garment cutting.

The dress is waist-seamed. The front features bust darts directed from the waistline toward the bust apex. The back includes waist darts. A concealed zipper closure is located at the center back, matching the main fabric. The skirt is gathered at the waistline. It features a decorative insert made of contrast (companion) fabric (it is recommended to select a well-draping fabric for better gathering effect). The insert consists of four panels and is gathered during attachment to the upper and lower skirt ruffles. The neckline and armholes are finished with facings (the facings are interfaced with fusible interfacing). The hem is finished with a turned-up hem seam. Seam allowances: main seams – 1.0 cm; neckline and armhole facing seams – 0.7 cm; hem allowance – 1.2 cm.

Women's standard sizes

To determine your size and choose the correct pattern size, compare your key measurements (bust, waist, and hip circumference) with the size chart below.

What You Receive

Immediately after payment, you will receive a ZIP archive. The archive must be extracted and downloaded to your device.

The folder includes:

1. Technical Documentation:

• technical drawing
• construction of pattern pieces and assembly details
• womens standart sizes
• material consumption table and recommendations
• finished garment measurement table (based on patterns)
• table of pattern part names
• pattern piece layouts/illustrations
• fabric layout plans by size for fabric width of 140 cm
• layout scheme for printing PDF patterns on A4 sheets with instructions

2. Patterns in the selected format with seam allowances indicated, including grainlines and notches for accurate assembly:

• PLT format patterns – for plotter printing (working width 140 cm), including a 1 m × 1 m calibration square file for plotter setup (not intended for printing)
• PDF format patterns – for A4 printer printing, including a 10 cm × 10 cm calibration square for printer setup